What You'll Learn in This Article
7 key topics covered to help you take action.
Why There Is No Good CPC To Look Up
What A Click Is Worth To You
A Cheap Click Can Be The Expensive One
Where To Find Real Figures For Your Own Keywords
When The Click Costs More Than It Is Worth
When It Is Worth Getting Help
Questions Malaysian Owners Ask About The Price Of A Click
Best Marketing Malaysia
Your Google Ads report gives an average cost per click, or CPC, for last month. Is it good? Somebody will send you a table of averages by industry to check it against. Before you look, ask two things about the table: which country's auctions it was built from, and whether any business in it has your margin.
We have found no figure for the price of a click in Malaysia with a publisher that stands behind it, so this guide quotes none. What it gives the owner of a Malaysian business is the honest test: work out what a click is worth to you, then set what you pay beside it.
Why There Is No Good CPC To Look Up
Start with what the number is. Google defines average CPC as the total cost of your clicks divided by the number of clicks. It describes your own account and nobody else's.
Each of those clicks was priced in its own auction, by the advertisers who happened to be competing for that search at that moment. How that works is set out in our guide to what CPC is and how Google prices a click. One point from it matters here. The minimum an ad must reach to be shown is set afresh in each auction, and Google says those thresholds can vary country by country. An average drawn from other countries, other keywords and other advertisers is the price of somebody else's clicks.
And a price, taken alone, says nothing about worth. Two businesses can pay exactly the same for a click, and one is making money while the other is paying to lose it. What separates them is what happens after the click.
What A Click Is Worth To You
You need three numbers, and all three are in your own records.
- What a customer leaves you. Take a typical sale and subtract the costs that come with every sale: the goods or materials, the labour on the job, delivery and payment fees. Leave rent and salaries out for now.
- How many enquiries become customers. Count the enquiries of the last few months, and the sales that came from them.
- How many clicks become enquiries. Google Ads calls this the conversion rate. Its definition is the number of conversions divided by the ad interactions that can be tracked to a conversion in the same period.
Multiply the three together and you have the most a click can cost before the advertising loses money. Call it your break-even CPC. Google's own guide to return on investment starts in the same place: its sum is your conversions multiplied by your average revenue for each conversion, less your advertising cost and your overhead.
Here is an example. Every amount in it is made up to show the sum, and none is a market price.
- A waterproofing contractor in Kuala Lumpur finds that a typical job leaves two thousand ringgit after materials and labour.
- One enquiry in four becomes a job. So an enquiry is worth five hundred ringgit.
- One click in twenty-five becomes an enquiry. So a click is worth twenty ringgit.
At twenty ringgit a click this contractor earns nothing: everything the jobs leave has gone to Google. A good CPC, for this business, is one far enough below twenty ringgit to pay the overheads and the owner. At ten ringgit, half of what each job leaves is kept.
Change one number and the answer moves. If only one click in fifty sent an enquiry, the same click would be worth ten ringgit, and paying ten would earn nothing. That is why a figure borrowed from another business is no use to you. It was right, at most, for their three numbers.
If you would rather not do it by hand, our Google Ads ROI calculator runs the same sum in ringgit, from the cost of a click through to leads, sales and profit. The figures already filled in there are examples and not market prices, so replace each one with your own. An online shop, where the cart reports every sale, can do the sum on its sales, as shown in our guide to a good ROAS.
A Cheap Click Can Be The Expensive One
The same contractor runs two keywords. The amounts are made up again.
- A broad one, "waterproofing". It costs four ringgit a click, and one click in two hundred sends an enquiry. An enquiry therefore costs eight hundred ringgit, and a job costs three thousand two hundred. Every job loses one thousand two hundred ringgit.
- A narrow one, "roof leak repair Kuala Lumpur". It costs twelve ringgit a click, and one click in ten sends an enquiry. An enquiry costs one hundred and twenty ringgit, and a job costs four hundred and eighty. Every job keeps one thousand five hundred and twenty ringgit.
The click that costs three times as much is the one that pays. So never read CPC alone. Read it keyword by keyword, beside the conversion rate of the same keyword, and judge the two together by what an enquiry costs. In Google Ads that figure is the cost per conversion, which Google works out as your total cost divided by your conversions. What counts as an enquiry, and how to tell a good one, is in our guide to cost per lead. The step from there to a paying customer is in our guide to cost per acquisition.
Where To Find Real Figures For Your Own Keywords
Before you spend: Keyword Planner
Google's Keyword Planner sits inside a Google Ads account, and Google asks you to complete the account setup, billing details included, before you can use it. It shows estimates of the searches a keyword receives and of the cost to target it.
Set the location first: Malaysia, or the state or town you serve. Then read two columns, which Google's page on its forecasts defines.
- Top of page bid (low range) approximates the 20th percentile of what advertisers have historically paid for a top of page bid on that keyword.
- Top of page bid (high range) approximates the 80th percentile.
Read them as the cheaper end and the dearer end of what advertisers have been paying to reach the top of the page, not as a floor and a ceiling. Both are based on the location you selected and on the last 30 days, and a keyword with little history may show no range at all. A third column, Competition, rates each keyword low, medium or high by the number of advertisers that showed on it.
Now set the range beside your break-even CPC. If the dearer end sits well below it, the keyword is worth testing. If even the cheaper end sits above it, that keyword cannot pay at your present conversion rate, however well the campaign is run. Google itself warns that these are estimates: real results depend on your bid, your budget, your ad quality and how customers in your industry behave. How to build the keyword list in the first place is in our guide to keyword research for SEM.
Once the ads are running: your own account
From the first month, your account outranks any estimate.
- Avg. CPC, Conv. rate and Cost / conv., side by side for each keyword. These are your prices and your results, not a market's.
- Est. top of page bid, a column on the Keywords page. Google describes it as the bid you likely need for your ad to show among the top ads when a search exactly matches your keyword. It is based on the keyword's Quality Score and on competition from other advertisers, and Google says that a very high estimate means the Quality Score is poor and could be improved. It is an estimate, not a promise of a place.
- The bid simulator. Google's simulators estimate what your clicks, cost and conversions could have been over the previous 7 days if you had set a different bid.
When The Click Costs More Than It Is Worth
Suppose a keyword you care about costs more than your break-even. There are five moves, and capping the bid is the last of them.
- Check the counting. If the WhatsApp taps, the calls or the forms are not being counted, your conversion rate is understated and every click looks too dear. Which actions should count is covered in our guide to SEM KPIs.
- Make the click worth more. Raise the share of clicks that enquire, with a page that answers the search and an easy way to reply, as set out in our guide to improving a Google Ads conversion rate. Raise the share of enquiries that buy, with a faster answer and a proper follow-up, which is the subject of our guide to managing a sales pipeline. If the contractor above turned two clicks in twenty-five into enquiries, each click would be worth forty ringgit, not twenty.
- Pay less for the same click. Google says higher quality ads typically cost less per click than lower quality ads. An ad that matches the search, and a page that delivers what the ad promised, can bring the price down without the bid being touched.
- Stop buying the clicks that never enquire. Read the search terms report and shut out the searches that were never going to buy, as explained in our guide to negative keywords.
- Set a ceiling, carefully. With the Maximise clicks strategy you can enter a maximum CPC bid limit. Google's page on that strategy says the limit can help to control costs, and warns that if it is too low the strategy might not be able to achieve its goal. A cap set below what those auctions require can leave you with very few clicks. The strategies that bid to the cost of an enquiry, in place of the cost of a click, are in our guide to PPC bidding.
Sometimes none of the five is enough, and the right answer is to leave the keyword alone. The price of a click is set by what it is worth to the other bidders. A rival who earns three times as much from each customer can pay more than you for the same click and still profit. Look for the narrower search where your offer is the better answer.
When It Is Worth Getting Help
None of these sums needs more than a calculator and your own records. The harder part is keeping the three numbers honest month after month: enquiries counted properly, sales traced back to the keyword that brought them, and the account changed when the figures say so. That is the work in our Google Ads management service in Malaysia, where the ad account stays in your name from the first day.
There are shorter pages on Google Ads for Johor Bahru businesses and Google Ads for Petaling Jaya businesses. Management starts from RM6,400 a month, the ad spend is separate and paid to Google directly, and every price is listed in ringgit. Our fee is a cost of winning the customer as well, so put it into your own sum.
You should also know that we are a Singapore company, and Singapore is where our track record with Google Ads was built. We have no table of Malaysian click prices to show you. What we can do is work the figures out from your own account.
For the Google Search and Meta ads we run, the offer on this site is Guaranteed >2X ROI, Or We Keep Working Free. It has conditions, and they are set out on the page where you book a free 30-minute call. Bring your margin and your ad account, and we will work out what a click is worth to you before we talk about what it costs.
Questions Malaysian Owners Ask About The Price Of A Click
What is the average CPC in Malaysia?
We have not found a figure whose publisher stands behind it, and none of the Google pages this guide draws on gives one. Keyword Planner will estimate the range for your own keywords in your own area, which is more use to you than a national average would be.
Is a higher CPC always worse?
No. A dearer click on a search that is close to buying can cost less for each customer than a cheap click on a vague one, as the two keywords above show. Compare keywords by what an enquiry costs.
Can a CPC be too low?
Yes, when the low price is the price of the wrong clicks. Before you celebrate a low average, open the search terms report and see which searches the clicks came from. The report can be split by network and by device, which shows where the cheap clicks were bought.
Is Best Marketing a Malaysian company?
No. Best Marketing is a Singapore company, registered in Singapore. We work with you over Zoom, and the prices on this site are in ringgit.
